Guide to Accurate Window Measurement for Mini Blinds

Measuring your windows correctly for mini blinds is crucial to ensure a perfect fit and an aesthetically pleasing result. Follow these detailed steps to measure your windows accurately and place your order confidently.

Tools You’ll Need

Measuring tape Pencil Paper for notes

Steps to Measure

Decide on Mounting Type

There are two primary mounting options for mini blinds: inside mount and outside mount. Here’s how to measure for each type.

Inside Mount (Blinds fit inside the window frame)

Width: Measure the width of the window frame at three points: top middle, bottom, and middle. Use the narrowest measurement for your blinds. Height: Measure the height of the window frame on the left middle and right sides. Use the longest measurement for your blinds. Depth: If applicable, measure the depth of the window frame to ensure the blinds will fit.

Outside Mount (Blinds are mounted on the wall or trim outside the window frame)

Width: Measure the width of the window plus any additional space you want on either side. Typically, add 1 to 3 inches for better light coverage. Height: Measure from the top of where you want to mount the blinds down to the bottom of the window or wherever you want the blinds to end. Consider adding extra length usually 1 to 3 inches for better coverage.

Tips

Rounding Measurements: Round to the nearest 1/8 inch for precision. Double-Check: Always measure twice to ensure accuracy. Record Measurements: Write down your measurements immediately to avoid confusion later.

Choosing the Right Mounting Type

You can choose between an inside mount or an outside mount based on your preference. Almost every retailer site provides specific directions for measuring your windows for each type of blind. Here are some additional considerations for each type:

:::inside mount Measure inside of the window frame, especially if there are decorative elements or hardware on the frame that might affect the fit. Make sure to communicate with the person cutting the blinds that this is the window measurement so they can do a slight adjustment for smooth operation. :::outside mount Add 2 inches for both sides to ensure an inch overhang on either side when installed.

Conclusion

By following these detailed steps, you can ensure you get the accurate measurements needed to order your mini blinds. This will help prevent any mismatches or fit issues, ensuring a professional and visually appealing finished look.